Lapidary Wet Belt Sanders

Use Silicon Carbide, Diamond, Cork & Felt
Wet Belt Sanders and Polishers Feature: · Unobstructed access to sanding work area. · Quick change belt system. · Adjustable backup plate. Sands flat surfaces vertically with up to a 13” high back plate. · Upright bearing support casting mounted on a heavy aluminum tank base or a heavy 16 gauge powder coated steel tank base. · Delivery sponge for applying water to belt. · Single control alignment to keep belt running true. · Shielded bearings, double sealed and greased for life. · Operating instructions and guarantee. *All Now Available With 220v 50hz Motors. Additional cost only $ 42.00 Specify Special Voltage When Ordering.
Basic Wet Belt Sander
A really affordable wet belt sander. Takes 3" x 24" size belts. Sold less motor, water valve and spray nozzle. Size 11"L x 9"W x 17"H. Shipping weight 20 lbs.
Model No. 464WBS -- Wet Belt Sander	$ 380.00

Mounted Wet Belt Sander
This sander features the No. 464 unit with 1/3 HP, 110V motor and belt guard mounted on new rust proof aluminum topped Lami-I-Cushion base ready to plug in and operate. Water valve and spray nozzle is built in for easy hookup. Water valve takes 1/4" O.D. plastic tube for gravity water flow or 1/4" copper tube for pressure system. If needed, drain system can be provided by 1/2" O.D. plastic tube. Just squeeze tube end and insert in drain port. Overflow can then drain from sander tank. Size 25"L x 13"W x 19H. Shipping weight 45 lbs.
Model No. 466WBS -- Mounted Wet Belt Sander	$ 535.00

Commercial Wet Belt Sander
This wet belt sander and polisher is designed for production type work. 3" x 41 1/2" size belts provide for greater surface cutting and extended belt life. comes with 4" high back plate. Same water system as the smaller mounted sander. Comes complete with 1/3 HP, 110V motor and belt guard mounted on new rust proof aluminum topped Lami-I-Cushion base ready to plug in and operate. Size: 25"L x 13"W x 27"H. Shipping weight 50 lbs.
Model No. 760WBS -- Commercial Belt Sander	$ 746.25
HBP013 -- 13" High Back Plate	$ 47.25
Model No. 761WBS -- Deluxe Belt Sander (Same as No. 760 except this unit comes with 1/2 HP motor and 13" high back plate) Now comes with 4" backing plate at no additional cost. 13" high back plate makes it possible to wet sand flat surfaces vertically.	$ 866.25

Combination Wet Belt Sander & Muslin Buff Polisher
This combination unit has all the features of the features of the No. 466 sander plus a polish arbor that mounts a 6" muslin buff. Comes complete with a 1/3 HP, 110V motor and belt guard mounted on rust proof aluminum topped Lam-I-Cushion base ready to plug in and operate. Now Available With 110v or 220v 50 hz Motor For Use Outside U.S. Size 25"L x 13"W x 18H. Shipping weight 45 lbs.
Model No. 465WBS -- Combo Wet Belt Sander	$ 625.00
Model No. 4652WS -- Combo Wet Belt Sander 110/220v 50hz	$ 650.00

Wet-Belt Horizontal Sanders & Polishers

Features: Uses silicon carbide, diamond, cork, leather & felt belts Shielded bearings, double-sealed and greased for life Delivery sponge for applying water to belt Steel back plate for support. Sand flat surfaces horizontally Allows much larger pieces to be worked The 460 Horizontal Sander features a 1/3 horsepower 110V motor mounted on a 12" x 24" rust proof aluminum topped Lam-I-Cushion base. A water valve and spray nozzle is built in to the hood for easy hookup to your water supply. The water valve takes 1/4" O.D. plastic tube for gravity feed or 1/4" copper tube for pressure systems. If needed, drain system can be provided by 1/2" O.D. plastic tube. Just squeeze tube and insert in the drain port. Overflow can then drain from the sander tank. This unit uses the 3" x 25-7/32" sanding belts, with the quick change belt system so you can change your belts quickly and easily. The supported back plate gives you approximately a 3" x 6" working surface. Size 12" x 24" x 8". Shipping weight 50 lbs.
Model No. 460WBS -- Horizontal Sander	$ 561.25
The 762 Horizontal Sander features a 1/2 horsepower 110V motor mounted on a 21" x 24" rust proof aluminum topped Lam-I-Cushion base. This wet belt sander is designed for production work. The 3" x 13" working surface. This wet belt sander also has the quick-change belt system so you can change your belts quickly and easily.
Model No. 762WBS -- Commercial Horizontal Sander	$ 892.50

Payment Gateway

Cart

Wet Belt Sanders and Polishers

Use Silicon Carbide, Diamond, Cork & Felt

Wet Belt Sanders and Polishers Feature:

Basic Wet Belt Sander

Mounted Wet Belt Sander

Commercial Wet Belt Sander

Combination Wet Belt Sander & Muslin Buff Polisher

Wet-Belt Horizontal Sanders & Polishers