CIGARETTE LIGHTER CHARGER CHARGE YOUR BATTERY FROM THE CELL PHONE OR CIGARETTE LIGHTER OUTLET IN YOUR VEHICLE. This is the fastest way to charge the batteries we offeron this page. Just plug thecharger into the 12-volt out-let and put the clips on thebattery. You will have a full charge in about 30 min.
$10.00
+ S&H
12-VOLT WALL CHARGER FOR GEL CELLS
Plug this charger into your 110 volt wall out-let and the clips to either battery above. It takes about 8 hours to charge the 12-AHbattery and about14 hours to chargethe 17 amp battery.
$15.00
+ S & H
POWER YOUR FOX DIRECTLY ON 120 VOLTS
This 3 amp power supply eliminates the need for a battery to power your Fox when working at home. Simply plug the unitinto a house outletand hook the clip on your Fox to thepower studs.
$37.50
+ S&H
SMALL BLACK SAND MAGNET used to remove small amounts of magnetic black sand from your gold pan. The self-release feature makes it self-cleaning.
$5.00
+S & H
BACKPACK HARNESS FOR DESERT FOX
ATTACHES TO THE LATCH LOOPS ON THE ACTION PACKER CARRYING CASE.
$15.00
+ S&H
TROMMEL KIT
EXTENDED LEGS AND SPOUT FOR USING MOUNTAIN GOAT TROMMEL TO FEED THE DESERT FOX GOLD PANNING MACHINE
$35.00 + S&H
CAMEL NESTING CLASSIFIER SET
POT DIMENSIONS 7" DIAMETER, 4" HIGH
Any professional prospector will tell you that proper classification of placer material is the most important single step that leads to high recovery of placer gold. You will be amazed how easy it is to recover micro-fine gold, if it has been classified to the approximate size of thegold.
Always process the contents of each pot separately. Gold will separate much faster when the lighter materials are less than five times its mass. Specific gravity differences between gold and sand are what makes gold panning machines effective. When grains of gold, black sand and brown sand are compared, it will be noted that if the weights of the grains are equal, the size is greatly different. Likewise, if the grains are classified so that they are uniform in size, then the weights are very different. lt is this size to weight ratio that makes classification important when using a panning machine or even when you are panning by hand.
$39.00Per Set + S & H
We stock the following screens for those who wish to purchase individual mesh sizes: 8,10, 20, 30, 40, 50, 60 and 100. Price for individual screens:
$10.00 each + S & H
< This pot has a 10 X 10 mesh stainless steel screen. Any material over 10 mesh in size remains in this pot.
< This pot has a 20 X 20 mesh stainless steel screen. All material -10 to +20 remains in this pot.
< This pot has a 40 X 40 mesh stainless steel screen. All material -20 to + 40 mesh remains in this pot
< This pot has a 60 X 60 mesh stainless steel screen. All material -40 to + 60 remains in this pot
< This pot does not have a screen. It retains -60 mesh material. ( All pinpoint or "flour gold" will be found here.
This system is compact and easy to use. Just put your placer material in the top (10) pot, nest the other four pots as shown below and shake vigorously to separate the five sizes. Highest efficiency is achieved if the material is dry, but wet separation is possible by shaking the set in water