The Titan can take care of your grinding and polishing needs and do it fast and efficiently. It's the choice of dedicated hobbyists and professional cutters.

Start with it's all-diamond grinding and polishing wheels. They are mounted together on the machine, allowing you to proceed from start to finish without wasting time changing wheels. The grit sequence is the best all-around choice for shaping and polishing most stones, and they'll make short work of the task. If you need special grits for your particular job, the wheels are easy to change.

It you need to polish flats, you can attach regular flat laps to the left end using the special lap connector. On the right hand side use Lapcraft "No Hole" diamond discs, Nova discs, our new Magnetic Novas, or similar accessories having a 1/4"-20 thread bolt for attachment. A special geyser for use with the flat laps is included with the Titan. If you need to polish metal, we've made up a Jeweler's Buff Kit for the Titan.

Titan is rugged. It features a big 3/4 HP, 1800 RPM, 115/230 V. industrially rated motor that is sealed against grit contamination and never needs oiling. (This motor is available for export operating at 230 volts 50HZ.) It has a 1" diameter shaft that is even heavier through the bearings which have a 30 mm bore.

Shown at left is Titan's double pump Spra-Mist system that provides plenty of water to the wheels while you work, keeping your stones cool and the rock dust down. The hoods and pans are rugged, solid cast aluminum, yet are easily removed.